Precautions for long-term storage of crushing hammers

Tiempo de liberación:

2023/04/24

The crushing hammer should be stored in a place where the temperature difference does not change significantly, and attention should be paid to moisture and rain prevention.

Precautions for long-term storage of crushing hammers

1.The crushing hammer should be stored in a place where the temperature difference does not change significantly,and attention should be paid to moisture and rain prevention.

2.The steel drill should be removed and the internal nitrogen(N2)should be released to facilitate the complete entry of the piston into the oil cylinder(to prevent piston rust).

3.The end of the piston should be coated with butter or rust inhibitor,and the steel brazing and lining should be coated with rust inhibitor.

When lubrication is not possible,the steel drill must be retracted to facilitate the piston entering the cylinder.

5.The joint connecting the excavator/loader and the main components should be sealed with a joint cap to prevent dust from entering the oil pipe.

6.It is best to place the crushing hammer vertically.If not possible,the crushing hammer should be placed on the flat ground of the wooden strip.

En la página anterior:

Instalación y desmontaje del Martillo de rotura hidráulica

Ninguno

Siguiente página:

En la página anterior:

Instalación y desmontaje del Martillo de rotura hidráulica

Siguiente página:

Ninguno